G+_Gregg Ordon Posted June 14, 2016 Share Posted June 14, 2016 I have a Dremel 3d Idea printer. It came with a ton of Dremel filament. I am getting close to having to order more. Do I have to stick with the dremel or can I use other brands if so what does everyone recommend? Link to comment Share on other sites More sharing options...
G+_Tyler Pearson Posted June 14, 2016 Share Posted June 14, 2016 I dont have one but you should have no problem using third party pla. Where you will have an issue is that you will need to roll the pla onto the dremel spool or you will have to 3d print an adapter. There are sketchs avaliable but again i have never used them to br 100% sure which one works best. Or you can mount it on the outside or some other way. There are some videos about it on youtube as well. You might want to stick with a high quality or reliable reseller though. I dont currently own a 3d printer but i was under the impression that there are some cheap filments that can gum up or damage your heads not 100% sure. Link to comment Share on other sites More sharing options...
G+_Ben Reese Posted June 14, 2016 Share Posted June 14, 2016 I think Padre covered this on one of the last episodes. He uses 3rd party but had to print an adapter to use the spindle that it comes on. Link to comment Share on other sites More sharing options...
G+_Fr. Robert Ballecer, SJ Posted June 14, 2016 Share Posted June 14, 2016 Other brands are just fine. I like Hatchbox. Link to comment Share on other sites More sharing options...
G+_Rud Dog Posted June 15, 2016 Share Posted June 15, 2016 Is my memory failing or did Padre mention it may void your warranty? Link to comment Share on other sites More sharing options...
G+_Rud Dog Posted June 15, 2016 Share Posted June 15, 2016 Conveyor of information don't kill the messenger:) Link to comment Share on other sites More sharing options...
G+_Rud Dog Posted June 16, 2016 Share Posted June 16, 2016 Thank goodness getting older and need every drop. Link to comment Share on other sites More sharing options...
Recommended Posts