G+_Joshua Delaughter Posted June 27, 2015 Share Posted June 27, 2015 I have a naze32 flight controller, which has the smaller 30mm mounting holes. I'm using a 450 frame, which has holes for 45mm FCs. For the meantime I drilled 4 holes to mount the smaller flight controller, but would it be better to go with one of the mount/converters that has rubber dampeners? Anyone know how much of an effect the dampness have, good or bad? Link to comment Share on other sites More sharing options...
G+_Quadflyingmedic Posted June 27, 2015 Share Posted June 27, 2015 It would probobly work well. You can get different stiffness of bobbins to try. I usually just stick the board down with 3m double side tape Link to comment Share on other sites More sharing options...
G+_Eddie Foy Posted June 27, 2015 Share Posted June 27, 2015 Seen different points of views on isolating it from vibration. Reducing actual vibration is the solution, then isolating the FC from it. Vibrations is bad for bearings. (and most other things) Not sure about the naze32, but others' have a utility show/record real world vibrations. Link to comment Share on other sites More sharing options...
G+_Eddie Foy Posted June 27, 2015 Share Posted June 27, 2015 Velcro would make a good semi soft mount. the vibrations will actually work the velcro to a tighter bond. Link to comment Share on other sites More sharing options...
G+_Joshua Delaughter Posted June 27, 2015 Author Share Posted June 27, 2015 Sounds great guys, I like the tape and Velcro ideas, I was having trouble finding adapters, but I've got plenty of double sided tape and Velcro Link to comment Share on other sites More sharing options...
G+_Eddie Foy Posted June 27, 2015 Share Posted June 27, 2015 I've used 3M 'Command Strips' They hold like no tomorrow. (but not reusable.) Link to comment Share on other sites More sharing options...
G+_Joshua Delaughter Posted June 28, 2015 Author Share Posted June 28, 2015 Wayne Hobbins yup, I was going back and forth between something like that and just a solid mount. I just wasn't sure if adding the dampeners world also have any negative effects Link to comment Share on other sites More sharing options...
Recommended Posts