G+_Adam EL-Idrissi Posted January 13, 2015 Share Posted January 13, 2015 2 questions:1) is there a 3d printing service that you can send them a file and they print it? Does anyone on here do it? 2) with a raspberry pi, how can I use two WiFi dongles to make it an extender? There are some parts of campus that have really weak signal and I would like to use a rpi I have to kind of "fill the gap". I did a quick Google search on my break but didn't find anything too helpful. More just asking the same question over and over. Link to comment Share on other sites More sharing options...
G+_Taylor Graham Posted January 13, 2015 Share Posted January 13, 2015 1. Shapeways Link to comment Share on other sites More sharing options...
G+_Adam EL-Idrissi Posted January 13, 2015 Author Share Posted January 13, 2015 Taylor Graham? thank you. Didn't see them but I'll go look it up. I did a really weak search since I was limited on time. Link to comment Share on other sites More sharing options...
G+_Taylor Graham Posted January 13, 2015 Share Posted January 13, 2015 Shapeways is the biggest i think. You have your choice of all kinds of materials. I actually dont know of any alternatives though. Link to comment Share on other sites More sharing options...
G+_Eddie Foy Posted January 13, 2015 Share Posted January 13, 2015 Staples is supposed to do the 3d printing. Not all that sure, have 2 printers myself. The RasPi. You would NOT want to use 2 WiFi adapters as a repeater/AP. Too duplicate many packets flying about. Use the wired port as a backhaul to the router/switch. Then a WiFi adapter that will work in 'master' mode. Not all will. Alpha's seem to be happy. then modify iptables to route from iwlan0 to eth0 Link to comment Share on other sites More sharing options...
Recommended Posts