Jump to content

I put the KH250 Build list together from the show notes, I figure it is about that time when some...


G+_Eddie Hughes
 Share

Recommended Posts

I put the KH250 Build list together from the show notes, I figure it is about that time when someone asks for it anyway...There are a few items missing but only because when I put the list together I already a few of the items, e.g. heat shrink, screws, nylon screws, Rx & Tx...

 

The "KnowHow250" Frame:

 FPV250 Frame w/Extension Frame $16.99 http://www.readytoflyquads.com/fpv250-v2-quadcopter-frame-250mm 

 

Motors: 2208-2300KV (Advanced) ($18 each or 4 for $60) $61.00 http://www.readytoflyquads.com/rtf-mini-motor-x2208-2300kv 

 

ESCs: F-30 Fire RED Series (SimonK) ($10 Each x 4) $40.00 http://www.readytoflyquads.com/speed-controllers/20-30-amp 

 

Flight Controller: Flip MWC Flight Controller 1.5 (Will require Soldering) $15.00 http://www.readytoflyquads.com/flip-mwc-flight-controller 

 

Power Distribution Power Distribution Board $1.50 http://www.readytoflyquads.com/mini-power-distribution-board 

 

Male XT60 + 12AWG Wire lead $1.50 http://www.readytoflyquads.com/xt60-female-plug-plus-xt60-12-awg 

 

Silicone Wire (12 Gauge - 1Meter Red/1Meter Black) $3.25 http://www.readytoflyquads.com/silicone-wire-14-12-awg-one-meter-black-one-meter-red RTFQ -

 

Flat Rate Shipping (In the United States) $4.50

 

5x3 Gemfan Nylon Props $5.56 http://www.amazon.com/gp/product/B00JSIYU2Y/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1 

 

Bullets (3.5mm x 20) $3.99 http://www.amazon.com/gp/product/B00DGL1T1O/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 

 

$153.29 The total for this kit is just over $153 SHIPPED to your door in the US - 

 

As for Batteries: Turnigy 3s 2200mAh 25C $9.76 http://www.hobbyking.com/hobbyking/store/__8934__Turnigy_2200mAh_3S_25C_Lipo_Pack.html 

 

Zippy Compact 4s 2700mAh 60C $26.73http://www.hobbyking.com/hobbyking/store/__63396__ZIPPY_Compact_2700mAh_4s_60c_Lipo_Pack.html

Link to comment
Share on other sites

 Share

×
×
  • Create New...