Jump to content

For anyone doing the Diatone 150 build


 Share

Recommended Posts

For anyone doing the Diatone 150 build. You might need to put a voltage regulator or something between the main power board and the transmitter. If you read the bold letters on this page, http://rotorgeeks.com/index.php?route=product/product&product_id=335  It says the littlebees can put voltage spikes into the main power board. I flew mine for the first time last Saturday. It was working fine. Crashed a few times but all was well. This thing is solid. Back home I tested the video and changed the lenses out as they were a slight bit blurry to me. I spun up the motors to make sure they were working fine. Later I tested the video again and got nothing. The vtx would not change channels. So I got another vtx and it was working but no video. Evidently it took out my camera as well. I have another camera ordered but nothing to test atm. I'll let you know if it works out. Just something to be cautious about.

http://rotorgeeks.com/index.php?route=product/product&product_id=335

Link to comment
Share on other sites

  • 2 weeks later...
 Share

×
×
  • Create New...