G+_Alessandro Moretti Posted October 6, 2016 Share Posted October 6, 2016 Hi Guys, I'm having some trouble with my ESC and I've been told by support from hobby kind to try and change thte timing to fix the issue. I'm quite new to this hobby, but remember that padres in one episode was explaining a easy way to programming you ESC using an arduino. I can't find it in the 250 episodes, would anyone remember? Thanks! Link to comment Share on other sites More sharing options...
G+_Eddie Foy Posted October 6, 2016 Share Posted October 6, 2016 Can you elaborate more on the problem(s) and symptom(s)? Timing of what exactly? The PWM/PPM from the flight controller to the ESC should be fixed (freq-wise while duty cycle varies for speed), and the ESC I don't think has any bearing on that. The programing them is really only flashing firmware. (If I'm correct on this) the whole PID settings are in the flight controller. Link to comment Share on other sites More sharing options...
G+_T Burns Posted October 7, 2016 Share Posted October 7, 2016 You can find simple calibration (using only the radio transmitter/receiver and battery) instructions in Ep 120 around 26 minutes. For the arduino programming, jump to Ep 191 around 12:45 minutes. Link to comment Share on other sites More sharing options...
Recommended Posts