G+_Jamal McCollin Posted May 13, 2015 Share Posted May 13, 2015 hi guys im doin a 450 quad build it a necessary to include a Integy C23212 Lipo Voltage Checker/Warning Buzzer into my build Link to comment Share on other sites More sharing options...
G+_610GARAGE Posted May 13, 2015 Share Posted May 13, 2015 I'm %99.9 sure that the KK board has this feature. You just need to run a wire from the battery to the battery header on the kk so that it can monitor the voltage. You will also need to supply your own buzzer. I never did this with my quad though. I can tell pretty easily when the battery is getting low. Link to comment Share on other sites More sharing options...
G+_Conan Mills Posted May 13, 2015 Share Posted May 13, 2015 The newer KK2 boards come with the buzzer too, at least mine did. Link to comment Share on other sites More sharing options...
G+_Nick Whitworth Posted May 13, 2015 Share Posted May 13, 2015 I used a cheap lipo monitor (less than $2 on eBay) for a while, until I got my flight controller's battery monitor working. Flight controllers only monitor the full pack voltage, whereas a lipo monitor typically connects to the balance plug, and monitors each cell's voltage. Link to comment Share on other sites More sharing options...
G+_Eddie Foy Posted May 13, 2015 Share Posted May 13, 2015 I like the KK a lot, but start researching a more capable FC GPS/ compass/ telemetry, etc options. The 450 class is a better platform to add more features. (notice I didn't say 'better') Link to comment Share on other sites More sharing options...
G+_Jamal McCollin Posted May 14, 2015 Author Share Posted May 14, 2015 So how about the ublox 6H gps with compass is this a good one Link to comment Share on other sites More sharing options...
Recommended Posts