G+_Zachary McIlvoy Posted June 17, 2016 Share Posted June 17, 2016 I'm in the process of restoring an old Pachinko machine, and need to replace the power source as the one it had gave out and was a hack job anyways from when I purchased it. Can anybody recommend a small form-factor power supply that will go from wall plug to 24V leads? Thanks! Link to comment Share on other sites More sharing options...
G+_Branden Snyder Posted June 17, 2016 Share Posted June 17, 2016 I've had this little guy on my wish list for a couple months. I don't have any first hand experience but it could be a good starting point. It's only 2 amps, if you haven't already then I recommend calculating your max power requirements. Also, it's open frame and I planned on 3D printing a case for it but maybe your use-case doesn't require one https://www.amazon.com/gp/aw/d/B014165NPU Link to comment Share on other sites More sharing options...
G+_Aaron Kimmins Posted June 17, 2016 Share Posted June 17, 2016 Could also find a 24v transformer and build up a circuit board to change to dc... Link to comment Share on other sites More sharing options...
G+_Zachary McIlvoy Posted June 17, 2016 Author Share Posted June 17, 2016 Branden Snyder? that looks like a great option, much better luck than I had looking on Amazon, and the related links showed me one with a bit of a case included. Don't feel the need to print one this time haha. Working on power draw right now Aaron Kimmins?that's kinda what I had going before, wanted to get something a little more integrated this time around. Enjoying putting the work in elsewhere on the machine so I didn't really want to make the power supply a project too Link to comment Share on other sites More sharing options...
G+_Aaron Kimmins Posted June 20, 2016 Share Posted June 20, 2016 Zachary McIlvoy ahhh, that makes sense Link to comment Share on other sites More sharing options...
G+_Bill Boelke Posted June 23, 2016 Share Posted June 23, 2016 http://pachinkoplanet.com/zencart/index.php?main_page=product_info&products_id=40 Link to comment Share on other sites More sharing options...
Recommended Posts