G+_Erik Ellsinger Posted August 30, 2015 Share Posted August 30, 2015 I'm in the process of connecting a Bluetooth module (http://www.readytoflyquads.com/serial-bluetooth-module-for-multiwiicopter-configuration) to my Flip MWC 1.5 (http://www.readytoflyquads.com/flip-mwc-flight-controller). The wiring instructions on the RTFQ seems to differ a bit from what I see on the Bluetooth module. The RTFQ site say it should be connected like this: GND -> GND VCC -> 5V(VCC) RXI -> TX TXO -> RX First problem, the Flip MWC 1.5 have two pins named GND. I'm guessing I should use the GND pin that is on the same row as the 5V, RX and TX pins, but I'm just guessing. Does anyone know the answer? Also, my Bluetooth module doesn't have the pins RXI and TXO, it has RXD and TXD. Again I'm guessing that is what they mean but does anyone know for sure? http://www.readytoflyquads.com/serial-bluetooth-module-for-multiwiicopter-configuration Link to comment Share on other sites More sharing options...
Recommended Posts