G+_Daniel Naberhaus Posted March 25, 2016 Share Posted March 25, 2016 Quad 150 build with k2 mini..... When I apply 5 volts to the ESC side of the flight controller The screen won't turn on and the flight controller doesn't seem to be powered... If I apply five Volts to the antenna side then everything boots and I can configure the flight controller. dOes this mean I need to solder both the Fs_R6B receiver and the power from the distribution board to the 5 volt and ground on the antenna side of the flight controller? Dan. Dnaberhaus@gmail.com I haven't removed pins or soldered any of flight controller yet until I know it is going to work...I am a newby, this is my first quad. Thanks for your patience. Link to comment Share on other sites More sharing options...
G+_zyga zyga Posted March 26, 2016 Share Posted March 26, 2016 Pic would help. Link to comment Share on other sites More sharing options...
G+_Daniel Naberhaus Posted March 26, 2016 Author Share Posted March 26, 2016 Thanks Link to comment Share on other sites More sharing options...
Recommended Posts