G+_Rodrigo Graça Posted January 26, 2015 Share Posted January 26, 2015 I have a Syma X5C, and it stopped working... It doesn't answer to the controller... I turn the Syma X5C on, then the controller, then I move the stick up and down and the SYMA X5C does not stop flashing the LED lights.... They flash forever... The controller shows everything normaly as if I was flying... (throttle, etc) Any ideas on how to solve this problem? Video: Thanks! Link to comment Share on other sites More sharing options...
G+_Morne Smith Posted January 26, 2015 Share Posted January 26, 2015 Put Syma on level table...switch controller on...then syma...do sync...and move both sticks to bottom right corner! Link to comment Share on other sites More sharing options...
G+_Rodrigo Graça Posted January 26, 2015 Author Share Posted January 26, 2015 Morne Smith It's not answering to that, and I think this problem started after I have done that for the first time... (Because I'm not sure if I was still able to control it after the first time I've done that) Link to comment Share on other sites More sharing options...
G+_Rodrigo Graça Posted January 27, 2015 Author Share Posted January 27, 2015 Harold Smith about the storage of batteries, I think my house will not burn because of them, but I'm not storing them inside anything... Link to comment Share on other sites More sharing options...
G+_Rodrigo Graça Posted January 27, 2015 Author Share Posted January 27, 2015 Harold Smith I've hooked up the quad to a bench power supply and it has the same problem... by other words, it's not a battery problem.... Link to comment Share on other sites More sharing options...
G+_Rodrigo Graça Posted January 27, 2015 Author Share Posted January 27, 2015 Harold Smith mine starts flashing, then goes to a "slower flash" and stays like that forever, because it does not sync with the remote.... Link to comment Share on other sites More sharing options...
G+_Rodrigo Graça Posted January 27, 2015 Author Share Posted January 27, 2015 Harold Smith I've made a video so that you can see it happening: Link to comment Share on other sites More sharing options...
G+_Rodrigo Graça Posted January 28, 2015 Author Share Posted January 28, 2015 Harold Smith I think i already tried that... I've tried everything I could... ;( Link to comment Share on other sites More sharing options...
G+_kevin F. Posted March 26, 2015 Share Posted March 26, 2015 Damn, if I don't have the same prob you guys had, rapidly flashing lights. I have 2 x5c Trouble #1 the quads lights begin flashing as soon as I plug in the battery, whether the it's switched on or not. The other just flashes rapidly and won't sync. Anyone find a fix? Link to comment Share on other sites More sharing options...
G+_kevin F. Posted March 26, 2015 Share Posted March 26, 2015 So, I "Put Syma on level table...switch controller on...then syma...do sync...and move both sticks to bottom right corner!" and ... thank you Morne. BUT though they both do fly now one of the the lights flash continually whether power switch is off or on. Link to comment Share on other sites More sharing options...
G+_BrownstoneAruba Posted September 30, 2015 Share Posted September 30, 2015 Rodrigo, did you find a fix for it? I have the same issues with my Syma x5c. Link to comment Share on other sites More sharing options...
G+_kevin F. Posted September 30, 2015 Share Posted September 30, 2015 No, I tried everything. However, it don't much matter now gave it away. Then got a WLToys v666, flew that, did every modification I could find, then gave it away. But I have the bug and am saving for a DJI Inspire. I found that I love flying and video, so now I'm gonna do it right. Link to comment Share on other sites More sharing options...
G+_Rodrigo Graça Posted September 30, 2015 Author Share Posted September 30, 2015 kevin F. no... Link to comment Share on other sites More sharing options...
G+_Lysander Dcosta Posted October 23, 2015 Share Posted October 23, 2015 Rodrigo Graça? I got the same problem please help me guys Link to comment Share on other sites More sharing options...
Recommended Posts